Swissbit C-350 Series – Industrial CompactFlash™ Card, SLC,  32 MBytes up to 256 MBytes



1. Tóm tắt về dòng thẻ nhớ công nghiệp C-350
 Capacities: 32 MBytes, 64 MBytes, 128 MBytes, 256 MBytes
 Form Factor: CompactFlash Card Type I (36.4 mm x 42.8 mm x 3.3 mm)
 Compliance1: CompactFlashTM specification 3.0 (4.1 compatible)
 Command Sets: CFA feature set, HPA, Power Management, S.M.A.R.T.
 High Performance:
o Burst Transfer Rate: Up to 66 MBytes/s UDMA4
o Read Performance: Sequential Read up to 19.8 MBytes/s, Random Read IOPS up to 2,900
o Write Performance: Sequential Write up to 11.4 MBytes/s, Random Write IOPS up to 20
 Operating Temperature Range:
o Commercial: 0 °C to 70 °C
o Industrial: -40 °C to 85 °C
 Storage Temperature Range: -50 °C to 100 °C
 Operating Voltage: 3.3V ± 10% / 5V ± 10%
 Power (Max Capacity):
o Read (Active): 110mA
o Write (Active): 115mA
o Idle: 2mA
 Data Retention: 10 Years @ Life Begin; 1 Year @ Life End
 Endurance in TeraBytes Written (TBW):
o Sequential WL: up to 25 TBW
o Enterprise WL: up to 0.76 TBW
 Shock/Vibration: 1,500 g / 20 g
 High-Performance 32-Bit Processor with Integrated, Parallel Flash Interface Engines:
o Single-Level Cell (SLC) NAND Flash
o Hardware RS-Code ECC (4 Bytes/528 Bytes correction)
 High Reliability:
o Mean Time Between Failure (MTBF): > 3,000,000 hours @ 25°C
o Data Reliability: < 1 non-recoverable error per 1014 bits read

2. Tính năng của thẻ nhớ Swissbit dòng C-350
 SLC NAND Flash with long-term availability
 Highly-integrated memory controller
o Fully compliant with CompactFlashTM specification 3.0, compatible with specification 4.1
o Fully compatible with PCMCIA specification
o PC Card ATA Interface supported
o True IDE mode compatible
o Up to PIO mode 6 supported
o Up to MDMA4 supported
o Up to UDMA4 supported
o Hardware RS-code ECC (4 Bytes/528 Bytes correction)
o Fix drive (IDE mode) & removable drive (PCMCIA mode) as default in the same card
 Small form factor
o CFC Type I: 36.4 mm x 42.8 mm x 3.3 mm
 Low-power CMOS technology
 3.3V or 5.0V power supply
 Power saving mode (with automatic wake-up)
 S.M.A.R.T. support
 Wear Leveling: equal wear leveling of static and dynamic data
The wear leveling assures that dynamic data as well as static data is balanced evenly across the
memory. With that the maximum write endurance of the device is guaranteed.
 Patented power-off reliability
o No data loss of older sectors
o All data written to the flash if card status is ready after write command
 Hot swappable in PCMCIA modes
 Operating System support
o Standard Software Drivers operation CompactFlash
 Life Cycle Management
 Controlled “Locked” BOM
 Swissbit Life Time Monitoring (SBLTM) Tool and SDK for SBLTM (on request)

3. Mã đặt hàng thẻ nhớ Swissbit C-350 Series
Table 1: Standard Product List
32 MBytes SFCF0032HxBK1WI-C-MS-5y3-STD SFCF0032HxBK1WI-I-MS-5y3-STD
64 MBytes SFCF0064HxBK1WI-C-MS-5y3-STD SFCF0064HxBK1WI-I-MS-5y3-STD
128 MBytes SFCF0128HxBK1WI-C-MS-5y3-STD SFCF0128HxBK1WI-I-MS-5y3-STD
256 MBytes SFCF0256HxBK1WI-C-MS-5y3-STD SFCF0256HxBK1WI-I-MS-5y3-STD
x = product generation and y = firmware revision

Table 2: Available Part Numbers
32 MBytes SFCF0032H1BK1WI-C-MS-513-STD SFCF0032H1BK1WI-I-MS-513-STD
64 MBytes SFCF0064H1BK1WI-C-MS-513-STD SFCF0064H1BK1WI-I-MS-513-STD
128 MBytes SFCF0128H1BK1WI-C-MS-513-STD SFCF0128H1BK1WI-I-MS-513-STD
256 MBytes SFCF0256H1BK1WI-C-MS-513-STD SFCF0256H1BK1WI-I-MS-513-STD

Xem thêm về Swissbit Card


Tags:
Facebook Twitter Whatsapp